MDBT42Q-192K

Raytac nRF52810 module employed MDBT42Q series design is a hardware pin to pin compatible to nRF52832 solution with both Chip Antenna and PCB Antenna option for selection.

For customers looking for Fair form factor and nRF52832 Solution may select MDBT42Q series module
MDBT42Q-512KV2 deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42Q-P512KV2 deployed PCB Antenna and offers a fair connectivity ability.

For customers looking for Smaller form factor and nRF52832 Solution may select MDBT42 series module.
MDBT42-512KV2 deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42-P512KV2 deployed PCB Antenna and offers a fair connectivity ability.

For customers looking for Compact form factor and nRF52832 Solution may select MDBT42V series module.
MDBT42V-512KV2 deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42V-P512KV2 deployed PCB Antenna and offers a fair connectivity ability.

For customers looking for Entry Level nRF52810 SoC, MBT42Q offers a pin to pin compatible module solution.
MDBT42Q-192K deployed Chip Antenna and offers a excellent connectivity ability.
MDBT42Q-P192K deployed PCB Antenna and offers a fair connectivity ability.

For customers looking for Entry Level, BT5 Long Rage, Multiprotocol nRF52811 SoC, MBT42Q offers a pin to pin compatible module solution.
MDBT42Q-192KL deployed Chip Antenna and offers a excellentconnectivity ability.
MDBT42Q-P192KL deployed PCB Antenna and offers a fairconnectivity ability.


 

Raytac's MDBT42Q-192K & MDBT42Q-P192K is a BT5 ＆ BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52810 SoC solution, which incorporates: GPIO, SPI, UART, I2C, PWM interfaces for connecting peripherals and sensors.

Quick Specifications

• 32-bit ARM® Cortex™ M4 CPU
• Supply: 1.7V – 3.6V
• Memory: 192kB Flash Memory
• RAM: 24kB
• Tx Power: +4 dBm @ 7.5mA, 0 dBm @ 5.3mA
• Rx Sensitivity: -96 dBm @ 5.4mA
• Flexible and configurable 32 GPIO (8 analog inputs)
• Interfaces: UART / I2C / SPI / PWM
• 3 x Hardware SPI master ; 3 x Hardware SPI slave‧2 x two-wire master ; 2 x two-wire slave
  •  1 x UART (CTS / RTS)
  •  PDM for digital microphone
  •  I2S for audio
• 12-bit / 200KSPS ADC
• 128-bit AES ECB / CCM / AAR co-processor
• Low cost external crystal 32MHz ± 40ppm for Bluetooth ; ± 50ppm for ANT Plus
• Low power 32MHz crystal and RC oscillators
• Operating Temp: -40°C to +85°C

Specification：                                                                                    
MDBT42Q-192K & MDBT42Q-P192K_nRF52810 Spec (Ver.D)

Design Guide includes
MDBT42Q & MDBT42Q-P Footprint_Design Guide (181015)

• Footprint (compatible for Protel, Eagle, Altium Design)
• 2D/3D drawing
• Reflow/Solder Profile
• Spec for external 32.768KHz

RoHS & REACH Report：
2019 RoHS & REACH Report for MDBT42Q & MDBT42Q-P

Related Links：
• Nordic  https://www.nordicsemi.com/eng/Products/3rd-Party-Bluetooth-low-energy-Modules
(Raytac's MDBT42Q-192K / MDBT42Q-P192K module is a qualified Nordic 3rd Party Bluetooth low energy module, please go following website for more detailed information.)